Do you know how to install 3 Inch Caster Wheels? Is the installed caster flexible when it is working?
After selecting the caster specifications, the correct installation of the casters is a very important part. It not only ensures the flexibility of the wheel operation, but also improves the working efficiency. It can also extend the service life of the casters and reduce the cost of the enterprise.
Below, China Aluminum Tube Supplier introduces the precautions for correct caster installation:
1. When installing the casters, the installation plane should be kept horizontal.
2. When installing the universal caster, keep the shaft installed in the vertical state.
3. After confirming that the mounting surface fits, select the appropriate size of screws, screws, nuts, washers, etc., insert the mounting holes, and tighten until no gap is found. If it is a screw caster, please pay attention to when the screw is screwed into the installation, please tighten the hex nut with a suitable wrench to avoid the screw break due to excessive installation clearance.
4. When installing the brake casters, please install them in the non-braking state to facilitate the adjustment of the angle during the installation process.
5. When the directional casters are used with the universal casters, the same specifications should be selected to make the matching degree higher and the operation coordination better.
6. Do not put the casters into operation immediately after the installation of the casters. First, observe whether the casters are at the same level. If they are unbalanced, they need to be re-adjusted until they are consistent
Sign up to receive our newsletter and exclusive discounts and offters.
